Chat with us, powered by LiveChat
Call Us: 972- 644-6556

The Homeowner’s Guide To Roofing Terms

Don’t just nod and smile when your contractor starts throwing around confusing roofing terminology! Our glossary of the most common roofing terms will help you make educated decisions regarding your roofing project, and give you confidence when it’s time to sign the check.

This guide should help you understand all the roofing terms you need, but if you want even more roofing information, we highly recommend the comprehensive GAF roofing glossary.

Roof Types  |  Slope And Pitch  |  Parts Of A Roof  |  Drip Edge And Trimming

Roof Types

A roof’s shape plays a major role in the overall look and style of your home. It can also provide additional living space and affect how weatherproof your home is.

Two of the most common types are the gable roof and the hip roof. Both shed water and snow easily, but they are quite different aesthetically.

A gable roof is the typical triangular roof you see when kids draw a picture of a home. A gable roof points upwards towards the sky, emphasizing the vertical lines of the house. Their simple design makes them an inexpensive option.

A hip roof has slopes on all four sides, which come together to form a horizontal ridge. While a hip roof is more stable than a gable roof, it is also more expensive to build.

A shed roof slopes in a single direction. Typically shed roofs are used on buildings where one wall is taller than the opposite wall, or on a lower porch or overhang.



Many of our clients like accent shed roof elements with standing seam metal roofing

A gambrel roof is another two-sided roof, like a gable roof. But while a gable roof has a single slope on each side, a gambrel roof has two slopes on each side. The top slope is flatter than the bottom slope. This style of roof is a simple construction with fewer materials so it can help keep the cost of your roof down.

Mansard roofs are a hybrid between a gambrel and a hip roof. To create maximum space under the roof, the section nearest the wall rises steeply, and then the roof continues as a milder pitch towards the center. From the ground, you will only be able to see the steep section and the house will look like it is flat on top.

Both mansard and gambrel roofs provides extra living space for a garret, attic or loft. They are also simple to frame out, which means you have the flexibility to add on a garret or dormers at a later date. However, mansard roofs cost more than typical roofs because of the embellishments and details that go into them.

Most multi-bedroom homes will combine several different styles of roof. You can find more details on the different pros and cons of each roof style at the Roof Cost Estimator


Roof Slope And Pitch: is there a difference?

Image Courtesy of InterNachi

While slope and pitch are sometimes used interchangeably, they are not the same thing.

Pitch measures how tall a roof is, compared to its width. In roofing terms, the pitch is the “rise” (roof height) divided by the “span” (roof width). This is usually expressed as a fraction: for a roof that has a rise of 4 feet over a span of the 24 feet, the pitch is “1 to 6,” expressed as 1/6.

Slope measures how steep the incline of a roof is. This is the amount of vertical rise, measured in inches, per every 12 inches of horizontal run. This is usually expressed as a ratio: a roof with a 4-in-12 slope rises 4 inches for every foot of horizontal distance.

Steeper roofs are generally more visually appealing and tend to last longer as they shed water much more efficiently and generally are subject to less direct U/V activity. They also leave room for second stories, gables and attic spaces, and give you more freedom to experiment with interesting siding, trim or eave styles.

However, the higher the pitch, the more square feet the roof takes up and the more materials your roof needs. Higher pitched roof may also tend to require more skilled labor to build or repair.

How Roof Slope Affects Roofing Materials

Information courtesy of InterNachi

As a homeowner, the main thing to understand is that the slope of your roof (how steep the incline is) affects the interior volume of your home, how effectively water drains off your roof, the look of your home – and which roofing materials you can use!

For example, wood shake shingles can be used on steeper roofs but are not suitable on a lower pitched roof. That’s because water drains more slowly off a lower pitch, and could begin to penetrate through the wood shakes.


Parts Of A Roof

Image Courtesy of Boral Roofing.

When your home is being built, the first part of your roof to go up will be the wooden frame. This creates the structure on which the rest of the roof will be built. The frame gives your roof its shape and will support the weight of all the materials used to build your roof. Some materials, such as tiles or slate, are much heavier than shingles and will require more hardy framing to support the extra weight. 

Once the frame is in place, it is covered by decking. Decking is a thin piece of wood that covers the frame and creates the foundation for the rest of the roof to be built on. The most commonly used materials for decking are either plywood or orientated strand board (OSB). They provide the bulk of support for anything that hits, lands or walks on your roof.

Applied directly to the decking is the underlayment. This is the first barrier layer of your roof. The underlayment’s primary function is to help stop any moisture that has seeped past the outer roofing material on top of it.

Traditional underlayment is made of felt that is saturated with tar. However, recent innovations have introduced synthetic underlayment with special properties such as added water resistance, reduced heat absorption, or being an ice barrier.

Now for the part of the roof that you will actually see from the ground! The roofing material is where you, the homeowner, will likely focus most of your attention. This is where you choose which material to use, the style and the color. There is a lot to consider when choosing whether you want clay, composition or a metal roof (to name a few options!) such as the overall aesthetic, price and longevity. Composition roofs are the most commonly used roofing material in homes in the US, and are also the cheapest option. However, metal roofs are becoming more popular due to their many benefits, like increased durability and long lifespan.

When considering which roofing material to use for your home, cost is usually an important factor. Your roofer will most likely talk about the “price per square.” A square is 100 square feet (10 feet by 10 feet), and is a common measurement for a roof area.

The roof planes are the large, flat sections of a roof. How the planes are arranged gives each roof its distinctive style and character. Where two roof panels meet you get a ridge, a hip, or a valley.

Ridges are where two roof planes meet projecting upwards. They are generally horizontal and the highest point on your roof. Ridge vents are important as they allow warm, moist air to escape your attic. The location of the ridge is important if there are height restrictions in your locality, as the height of a home is usually measured from the ground to the ridge. For this reason, it is important to know if any height restrictions exist in your area as they may affect the design of your roof.

A hip is a place where two roof planes meet and project outward. A hip is similar to a peak, but is not at the top of your roof and is usually not horizontal.

A valley, just like its geographic namesake, is a place where two planes meet and project inward.

A dormer and roof flashing on a metal roof

Water flows from multiple roof planes into the valleys, so your roof valleys will need to be covered with flashing. Flashing provides an added layer of protection from water damage in the areas of your roof that are most vulnerable to water. It is usually a thin metal sheet installed on valleys and around fixtures like chimneys, skylights, and vents. You can also use flashing to make a style choice: for example, copper flashing is often used to highlight aspects of the roof.

Another common place to put flashing is around dormers, where vertical walls meet the pitched roof. Similar to a valley, this area can collect a lot of water and requires extra protection. A dormer is a common feature on many two-story houses. It is a projection from the main plane of the roof that usually houses a window. The dormer is usually constructed to add space or natural light to the room inside.


Drip Edge And Roof Trimming

What about the edges of your roof? We can’t just let water roll off your roof and down the walls of your home, because that would cause water damage to the bricks and siding, and would cause foundational issues as water pools round the base of your home.

Drip edges (also known as eaves) are the edges of the roof that hang over the exterior walls of the house, consisting of a soffit and fascia. The eave can either be close, or tight to the wall depending on what look you want. Since the primary function of the eave is to take rainwater away from the walls and direct water into the gutters of the house, the further away it is, the better it can serve that function.

Drip edge of a roof
Image Courtesy of Emerald Home Improvements.

Where the eave edge of a roof extends past the exterior wall, the soffit is the horizontal underside of this extension. They tend to be perforated or have built-in vent openings to allow for attic ventilation. Soffits are usually the same design and color as your home’s siding, but can be different depending on your own personal tastes and preferences.

The fascia is the area of siding directly above the soffit. It’s the exposed board you see on the front of your roof’s overhang. Your fascia is also where the gutters are placed. The style and color of your fascia can add visual interest and give a finished look to your home.

Gutters are placed at the edges of the eaves on the fascia and are the plastic or metal troughs that take the water away from the edge of the roof. They are connected to downspouts and help direct water away from your home.

When you need a roof repair, or you’re ready for a roof replacement, please give us a call for a free inspection and estimate. We promise to always explain our roofing terminology and make sure you have complete confidence in your new roof!


Previous Blogs

6 Important Benefits of A Regular Roof Inspection
6 Important Benefits of A Regular Roof Inspection

Why get a roof inspection? Like regularly changing the oil in your car and getting tires rotated, it’s an important part of maintenance that will save you money (and headaches!) down the …

Do I Really Need A Roof Inspection?
Do I Really Need A Roof Inspection?

Do I Really Need A Roof Inspection? I’ll bet you never think about the roof over your head until something goes wrong. I know I don’t! But then there’s a telltale damp patch on the ce…

Tamko Lamarite Slate Has Been Discontinued! What To Do If You Have A Lamarite Roof
Tamko Lamarite Slate Has Been Discontinued! What To Do If You Have A Lamarite Roof

Tamko Lamarite Slate Has Been Discontinued! What To Do If You Have A Lamarite Roof. If you have a roof made of Tamko Lamarite, you might be in for a nasty surprise. After a deluge of consu…

The Homeowner’s Guide To Roofing Terms
The Homeowner’s Guide To Roofing Terms

The Homeowner’s Guide To Roofing Terms Don’t just nod and smile when your contractor starts throwing around confusing roofing terminology! Our glossary of the most common roofing terms wil…

How Long Does A Roof Last In Texas?
How Long Does A Roof Last In Texas?

How Long Does A Roof Last In Texas? Given all the wild weather around here, how long can you expect your home’s roof to last in Texas? The weather we experience here in Texas is no joke. Fr…

Do Metal Roofs Interfere With Cell Phone Reception?
Do Metal Roofs Interfere With Cell Phone Reception?

Do Metal Roofs Interfere With Cell Phone Reception? The short answer: Usually not! It’s pretty unlikely that getting a metal roof on your home will drastically change your cell phone signal. …

Call 972-644-6556 or Contact Us today for a free estimate!

What our Clients are Saying

  • Rusty, Plano

    All I can say is – dealing with Aaron Lenhart and Designer Roofing of Texas was excellent. Aaron and his people were professional, knowledgeable and nice to work with every step of the way.

    I felt their price was fair and they delivered exactly as promised. What more can you ask for in the real world? They started on time, ended on time and the house looks great with the new style of tile. I have referred a few friends to them since then and so far, everyone has been pleased!

  • Rob Paul

    The roof is fantastic and I really appreciate Designer Roofing’s hard work and professionalism throughout the process. It was absolutely the right decision for my project. Feel free to hand out my information as a reference for your company should anyone ask, I am happy to help.

    Robert G. Paul
    Division President, Dallas – Fort Worth – Austin, Toll Brothers, Inc.

  • Kumar, Frisco

    I was impressed throughout with Designer Roofing’s professionalism, experience and knowledge of the business. As my agent, you worked with my insurance company to get their approval, and I was delighted to see that you ordered specialized pictures of the house to make it easier for the insurance company to assess the damage and approve.

    Your team was experienced and they worked with a good work ethic to get the job done very quickly. This was key since you did not use novices to install the specialized Gerard stone coated steel roof. Your team was well trained: they covered the pool and daily used a magnet to clear the home premises of any metallic materials.

    You had no hesitation in ensuring my complete satisfaction, and sent in the experts to fix a couple of minor things that I wanted changed. Please accept my gratitude and congratulations for a job well done and a super service!! I shall be happy to recommend you and your company to anyone without hesitation. 

  • Stone coated steel metal tile roof

    Pam and Rick, Frisco

    We just wanted to drop you note and tell you how much we enjoy the new roof. The style we chose with your help looks great. More importantly, the service of you and your team was outstanding. Your crew was attentive to the details and cleaned up well each and every day. And, to top it off, you started and finished when you said you would. Job well done!

  • composite roofing by designer roofing

    Bing and Rachel, Plano

    We were battered by the windstorm of April 2008, which tore down our entire fence, a beautiful 10-year old tree, and a huge section of our composition roof.

    Designer Roofing came to our rescue and immediately patched the roof to prevent further weather damage. Despite a heavy workload brought on by the storm, Designer Roofing proceeded to replace our entire roof as soon as was possible. They replaced all fixtures and chimney flashings to perfectly match our new roof color, too.

    Designer Roofing was very professional throughout the job, helping us understand the re-roofing process, eagerly answering our every question, and giving us the greatest value for our insurance coverage and out-of-pocket costs. If we ever need a new roof again, Designer Roofing will be #1 on our list, and we would gladly recommend them to friends and family alike!